Home › ENGINE ยท 2TR-FBE › FUEL › SOLENOID VALVE (for Fuel Injection Volume Control)

SOLENOID VALVE (for Fuel Injection Volume Control) > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE SOLENOID VALVE ASSEMBLY


    A239214
  1. Disconnect the connector and 2 fuel hoses.



    A239215
  1. Remove the 2 nuts and solenoid valve assembly.



    A238195
  1. Remove the 2 screws and solenoid valve.