SOLENOID VALVE (for Fuel Cut Control) > INSTALLATION |
| 1. INSTALL SOLENOID VALVE ASSEMBLY |
Install the solenoid valve with the 2 screws.
Install the solenoid valve assembly with the bolt.
Connect the connector, No. 3 fuel hose and No. 2 fuel tube sub-assembly.
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 3. INSPECT FOR FUEL LEAK (for Fuel Sub Tank) |
Start the engine.
Check for fuel leaks.
Check that there are no fuel leaks from the fuel system after doing any maintenance or repairs. If there is a fuel leak, repair or replace parts as necessary.