Home › ENGINE · 2TR-FBE › FUEL › FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank)

FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank) > INSPECTION

for Preparation Click here



1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    A237763E01
  1. Check that the float moves smoothly between F and E.

  1. Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    F
    13.5 to 16.5 Ω
    Between E and F
    13.5 to 418.2 Ω (Gradually changes)
    E
    401.8 to 418.2 Ω

    HINT:
    If the result is not as specified, replace the fuel sender gauge assembly.