Home › ENGINE ยท 2TR-FBE › FUEL › FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank)

FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank) > REMOVAL

for Preparation Click here


NOTICE:
Do not try to remove the black vinyl hose as it is welded to the fuel suction tube assembly (Click here).



1. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
(Click here)


2. REMOVE FUEL SENDER GAUGE ASSEMBLY


    A237760
  1. Disconnect the fuel sender gauge connector.



    A237761
  1. Unlock the fuel sender gauge and slide it as shown in the illustration to remove it.