Home › ENGINE · 2KD-FTV › STARTING › GLOW RELAY

GLOW RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT GLOW RELAY


    A092673E60
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    Battery voltage not applied to terminals 1 and 2
    10 kΩ or higher
    Battery voltage applied to terminals 1 and 2
    Below 1 Ω

    If the result is not as specified, replace the glow relay.