Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › ULTRASONIC SENSOR

ULTRASONIC SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER

HINT:
Use the same procedure for both No. 1 ultrasonic sensor retainers.



    E134863E04
  1. Align the keyway of the ultrasonic sensor retainer with the protrusion of the rear bumper cover.
    Text in Illustration 
    *1
    Key way
    *2
    Protrusion of the rear bumper cover



    E225427
  1. Attach the 2 claws to install the ultrasonic sensor retainer to the rear bumper cover.

    NOTICE:
    1. Do not damage the rear bumper cover with the protrusion of the ultrasonic sensor retainer when installing the retainer.
    2. Firmly push in the No. 1 ultrasonic sensor retainer so that there is no gap between the retainer and the surface of the rear bumper cover.
    3. If there is a gap between the No. 1 ultrasonic sensor retainer and the rear bumper cover surface, push in the No. 1 ultrasonic sensor retainer. Do not push the No. 1 ultrasonic sensor.



2. INSTALL NO. 1 ULTRASONIC SENSOR

HINT:
Use the same procedure for both No. 1 ultrasonic sensors.



    E228249
  1. Attach the 2 claws to install the No. 1 ultrasonic sensor.

  1. Connect the connector.

    NOTICE:
    If there is a gap between the No. 1 ultrasonic sensor retainer and the rear bumper cover surface, push in the No. 1 ultrasonic sensor retainer. Do not push the No. 1 ultrasonic sensor.



3. INSTALL NO. 3 LUGGAGE ROOM WIRE
  1. Attach the 3 clamps to install the luggage room wire.

  1. Connect the 2 ultrasonic sensor connectors.



4. INSTALL REAR BUMPER COVER
  1. Install the rear bumper cover (Click here).