ULTRASONIC SENSOR > REMOVAL |
| 1. REMOVE REAR BUMPER COVER |
Remove the rear bumper cover (Click here).
| 2. REMOVE NO. 3 LUGGAGE ROOM WIRE |
![]() |
Disconnect the 2 ultrasonic sensor connectors.
Detach the 3 clamps and remove the luggage room wire from the bumper cover.
| 3. REMOVE NO. 1 ULTRASONIC SENSOR |
Disconnect the connector.
![]() |
While pushing down on the lever with a finger to release the claw on the top of the sensor, detach the claw on the other side to remove the No. 1 ultrasonic sensor.
| 4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER |
![]() |
Detach the 2 claws and remove the No. 1 ultrasonic sensor retainer from the rear bumper cover.