Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION ANTENNA

NAVIGATION ANTENNA > INSTALLATION



1. INSTALL NO. 1 NAVIGATION ANTENNA CORD SUB-ASSEMBLY
  1. Attach the clamp to install the No. 1 navigation antenna cord sub-assembly, and then connect the connector.



2. INSTALL NAVIGATION ANTENNA ASSEMBLY
  1. Install the navigation antenna assembly with the 2 screws.

  1. Connect the connector and attach the clamp.



3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).