Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION ANTENNA

NAVIGATION ANTENNA > REMOVAL



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)


4. REMOVE NAVIGATION ANTENNA ASSEMBLY


    E237855
  1. Detach the clamp and disconnect the connector.

  1. Remove the 2 screws and navigation antenna assembly.



5. REMOVE NO. 1 NAVIGATION ANTENNA CORD SUB-ASSEMBLY


    E237856
  1. Disconnect the connector.

  1. Detach the clamp and remove the No. 1 navigation antenna cord sub-assembly.