Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION RECEIVER

NAVIGATION RECEIVER > INSTALLATION


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL NO. 2 RADIO BRACKET
  1. Install the No. 2 radio bracket to the navigation receiver assembly with the 3 screws.



2. INSTALL NO. 1 RADIO BRACKET
  1. Install the No. 1 radio bracket to the navigation receiver assembly with the 3 screws.



3. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET
  1. Connect all the connectors.

  1. Attach the wire harness clamp.

  1. Insert the navigation receiver assembly with bracket to attach the 2 clips on its backside.

    NOTICE:
    When inserting the navigation receiver assembly, do not press the knobs on it.

  1. Install the navigation receiver assembly with bracket with the 4 screws.



4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
  1. for Manual Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 4 claws to connect the air conditioner control.

    3. Attach the 10 claws and 4 clips to install the center instrument cluster finish panel.

  1. for Automatic Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 8 claws and 4 clips to install the center instrument cluster finish panel.



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).