Home › BODY › SEAT › FRONT POWER SEAT MOTOR ASSEMBLY (for Reclining)

FRONT POWER SEAT MOTOR ASSEMBLY (for Reclining) > INSPECTION

for Preparation Click here



1. INSPECT POWER SEAT MOTOR ASSEMBLY (for Reclining, w/o Front Seat Side Airbag)


  1. Check the operation of the power seat motor assembly.



      B211339E02
    1. Apply battery voltage to the power seat motor assembly.

    2. Check that the motor gear rotates smoothly as follows.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 2
      Battery negative (-) → 1
      Motor gear rotates clockwise
      Battery positive (+) → 1
      Battery negative (-) → 2
      Motor gear rotates counterclockwise

      If the result is not as specified, replace the power seat motor assembly.
      Text in Illustration 
      *1
      Motor Gear
      *a
      Counterclockwise
      *b
      Clockwise
      *c
      Component without harness connected
      (Power Seat Motor Assembly)



2. INSPECT SEPARATE TYPE FRONT SEATBACK ASSEMBLY (w/ Front Seat Side Airbag)


  1. Check the operation of the separate type front seatback assembly (reclining motor).

    1. Temporarily install the separate type front seatback assembly to the separate type front seat cushion assembly with the 4 bolts.



    2. B284740E01
    3. Apply battery voltage to the separate type front seatback assembly (reclining motor).

    4. Check that the separate type front seatback assembly moves smoothly as follows.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 2
      Battery negative (-) → 1
      Forward
      Battery positive (+) → 1
      Battery negative (-) → 2
      Backward

      If the result is not as specified, replace the separate type front seatback assembly.
      Text in Illustration 
      *a
      Component without harness connected
      (Separate Type Front Seatback Assembly (Reclining Motor))
      V100135
      Forward
      V100136
      Backward