Home › BODY ELECTRICAL › LIGHTING › HEIGHT CONTROL SENSOR

HEIGHT CONTROL SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    E228171
  1. Rotate the rear height control sensor sub-assembly LH in the direction indicated by the arrow in the illustration to attach the claw.



    E228172E01
  1. Install the 2 bolts in the order shown in the illustration to install the rear height control sensor sub-assembly LH.
    Text in Illustration 
    *1
    Matchmarks

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Align the matchmarks on the rear height control sensor sub-assembly LH link and bracket.

  1. Connect the sensor link with the new nut.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the connector.



2. PERFORM INITIALIZATION
(Click here)