Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › CURTAIN SHIELD AIRBAG ASSEMBLY

CURTAIN SHIELD AIRBAG ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE ROOF HEADLINING ASSEMBLY
(Click here).


2. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH


    B211465
  1. Disconnect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.



  1. Remove the 9 bolts.


    B214751



  1. Detach the 9 claws and remove the curtain shield airbag assembly LH.


    B292781