Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO ANTENNA CORD

RADIO ANTENNA CORD > INSTALLATION

for Preparation Click here



1. INSTALL ANTENNA CORD SUB-ASSEMBLY


  1. w/ Roof Antenna:



    1. Install the antenna cord with the clamp bolt.


      E225165

    2. Attach the 6 clamps.

    3. Connect the connector.



  1. w/o Roof Antenna:



    1. Attach the 4 clamps shown in the illustration to install the antenna cord.


      E225164

    2. Connect the connector.



2. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



4. CHECK SRS WARNING LIGHT
(Click here)