Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO ANTENNA CORD

RADIO ANTENNA CORD > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)


4. REMOVE ANTENNA CORD SUB-ASSEMBLY


  1. w/o Roof Antenna:



    1. Disconnect the connector.


      E259188

    2. Detach the 4 clamps as shown in the illustration. Then remove the antenna cord.



  1. w/ Roof Antenna:



    1. Disconnect the connectors.


      E261519

    2. Detach the 5 clamps shown in the illustration.

    3. Remove the clamp bolt and antenna cord.