Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › CLEARANCE WARNING ECU

CLEARANCE WARNING ECU > INSTALLATION

for Preparation Click here



1. INSTALL CLEARANCE WARNING ECU


E195683
  1. Install the ECU with the bolt.

  1. Connect the connector.



2. INSTALL QUARTER INSIDE TRIM BOARD RH
  1. Detach the 8 claws and 10 clips to install the quarter inside trim board.

  1. Install the clip.

  1. w/ Rear No. 2 Seat:

    1. Connect the rear No. 2 seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Connect the rear No. 1 seat outer belt floor anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Attach the 2 claws to install the outer lap belt anchor cover.

    HINT:
    Use the same procedure for both outer lap belt anchor covers.



3. INSTALL BACK DOOR SCUFF PLATE
  1. Attach the 4 claws, 2 guides and 6 clips to install the back door scuff plate.



4. INSTALL REAR DOOR SCUFF PLATE RH


    E180638
  1. Attach the 2 clips and 7 claws to install the back door scuff plate.