Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › CLEARANCE WARNING ECU

CLEARANCE WARNING ECU > REMOVAL

for Preparation Click here



1. REMOVE REAR DOOR SCUFF PLATE RH


    E180638
  1. Detach the 7 claws and 2 clips, and remove the rear door scuff plate.



2. REMOVE BACK DOOR SCUFF PLATE


B276933
  1. Detach the 4 claws, 2 guides and 6 clips and remove the back door scuff plate.



3. REMOVE QUARTER INSIDE TRIM BOARD RH


B276928
  1. Detach the 2 claws and remove the outer lap belt anchor cover.

    HINT:
    Use the same procedure for both outer lap belt anchor covers.



    B277804
  1. Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.



    B277805
  1. w/ Rear No. 2 Seat:

    1. Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

  1. Using a clip remover, remove the clip.



  1. Detach the 8 claws and 10 clips and remove the quarter inside trim board.


    B276941



4. REMOVE CLEARANCE WARNING ECU


E195683
  1. Disconnect the connector.

  1. Remove the bolt and ECU.