Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › CLEARANCE WARNING BUZZER

CLEARANCE WARNING BUZZER > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 CLEARANCE WARNING BUZZER


E214846
  1. Attach the clamp to install the buzzer.

  1. Connect the connector.



2. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY
  1. Install the upper instrument panel sub-assembly (Click here).



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



4. CHECK SRS WARNING LIGHT (w/ Airbag System)
  1. Check the SRS warning light (Click here).