Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › CLEARANCE WARNING BUZZER

CLEARANCE WARNING BUZZER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
For vehicle with SRS:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
  1. Remove the upper instrument panel sub-assembly (Click here).



3. REMOVE NO. 1 CLEARANCE WARNING BUZZER


E214846
  1. Disconnect the connector.

  1. Detach the clamp and remove the buzzer.