Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 1GR-FE CHARGING

1GR-FE CHARGING > SERVICE DATA



for DENSO Made 
Battery
Standard specific gravity
1.25 to 1.29 at 20°C (68°F)
Charging circuit without load
Standard amperage
10 A or less
Standard voltage
13.2 to 14.8 V
(when engine speed at 2,000 rpm)
Charging circuit with load
Standard amperage
30 A or more
Voltage regulator
Regulating voltage
13.2 to 14.8 V
Generator rotor assembly
Standard resistance
Slip rings
1.7 to 2.1 Ω at 20°C (68°F)
Standard resistance
Slip ring - Rotor core
10 kΩ or higher
Standard diameter
14.2 to 14.4 mm (0.559 to 0.567 in.)
Minimum diameter
14.0 mm (0.556 in.)
Brush length
Standard exposed length
9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum exposed length
4.5 mm (0.177 in.)

for BOSCH Made 
Battery
Standard specific gravity
1.25 to 1.29 at 20°C (68°F)
Charging circuit without load
Standard amperage
10 A or less
Standard voltage
13.2 to 14.8 V
(when engine speed at 2,000 rpm)
Charging circuit with load
Standard amperage
30 A or more
Voltage regulator
Regulating voltage
13.2 to 14.8 V
Generator rotor assembly
Standard resistance
Slip rings
1.8 to 2.8 Ω at 20°C (68°F)
Standard resistance
Slip ring - Rotor core
10 kΩ or higher
Standard diameter
15.3 to 15.5 mm (0.602 to 0.610 in.)
Minimum diameter
14.9 mm (0.587 in.)
Brush length
Standard exposed length
13.2 (0.520 in.)
Minimum exposed length
6.0 mm (0.236 in.)