AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > SYSTEM DESCRIPTION |
| CD (Compact Disc) PLAYER OUTLINE |
A compact disc player uses a laser pickup to read digital signals recorded on a compact disc (CD). By converting the digital signals to analog, it can play music and audio.
Usable discs
This player can play only audio CDs, CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) that have any of the following marks:

Precautions for use of discs
Cleaning
![]() |
If dirt is on the disc surface, wipe it clean with a soft dry cloth such as an eyeglass cleaner for plastic lenses from the inside to the outside in a radial direction.
| MP3/WMA OUTLINE |
Playable MP3 file standards
| Compatible standard | MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3) |
| Compatible sampling frequency |
|
| Compatible bit rate |
|
| Compatible channel mode | Stereo, joint stereo, dual channel, monaural |
Playable WMA file standards
| Compatible standard | WMA Ver. 7, 8, and 9 |
| Compatible sampling frequency | 32, 44.1, 48 (kHz) |
| Compatible bit rate (Only compatible with 2-channel playback) |
|
ID3 tag and WMA tag
Additional textual information called ID3 tag can be input to MP3 files. Information such as song titles and artist names can be stored.
Additional textual information called WMA tag can be input to WMA files. Information such as song titles and artist names can be stored.
Usable media
Only CD-ROMs, CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be used to play MP3/WMA files.
Usable media format
Usable media format
| Disc format | CD-ROM Mode 1, CD-ROM XA Mode 2 Form 1, UDF 2.01 |
| File format | ISO 9660 Level 1 and Level 2 (Joliet, Romeo) |
Standard and restrictions
| Maximum directory levels | 8 levels |
| Maximum number of characters for a folder name/file name | 32 characters |
| Maximum number of folders | 192 (Including empty folders, root folders, and folders that do not contain MP3/WMA files) |
| Maximum number of files in a disc | 255 (Including non-MP3/WMA files) |
File names
Only files with an extension of ".mp3" or ".wma" can be recognized and played as MP3 or WMA files.
Save MP3 or WMA files with an extension of ".mp3" or ".wma".
| DIAGNOSTIC FUNCTION OUTLINE |
The audio and visual system has a diagnostic function (the result is indicated on the master unit).
| RADIO DESCRIPTION |
Radio frequency band
Radio broadcasts use the radio frequency bands shown in the table below.

![]() |
Service area
The service areas of AM and FM broadcasts are vastly different. Sometimes an AM broadcast can be received very clearly but an FM stereo broadcast cannot. An FM stereo broadcast has the smallest service area, and is prone to pick up static and other types of interference such as noise.
| *a | FM (Stereo) |
| *b | FM (Monaural) |
| *c | AM |
Radio reception problems
![]() |
Phasing
AM broadcasts are susceptible to electrical interference and another kind of interference called phasing. Occurring only at night, phasing is the interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off the ionosphere and the other signal is received directly from the transmitter.
| *a | Phasing |
| *b | Ionosphere |
![]() |
Multipath
Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off buildings or mountains and the other signal is received directly from the transmitter.
| *a | Multipath |
![]() |
Fade out
Fade out is caused by objects (buildings, mountains, and other such large obstacles) that deflect away part of a signal, resulting in a weaker signal when the object is between the transmitter and vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions. Low frequency radio waves, such as AM broadcasts, are much more difficult to deflect.
| *a | Fade Out |
Noise problem
Technicians must have a clear understanding about the noise complaint of each customer. Use the following table to diagnose noise problems.
| Radio Frequency | Noise Occurrence Condition | Presumable Cause |
| AM | Noise occurs in a specified area | Foreign noise |
| AM | Noise occurs when listening to an intermittent broadcast | An identical program transmitted from multiple towers can cause noise where the signals overlap |
| AM | Noise occurs only at night | Music beat from a distant broadcast |
| FM | Noise occurs while driving in a specified area | Multipath or phasing noise resulting from a change in FM frequency |
| "Bluetooth" OUTLINE |
"Bluetooth" is a trademark owned by Bluetooth SIG. Inc.
"Bluetooth" is a wireless connection technology that uses the 2.4 GHz frequency band. This makes it possible to connect a cellular phone ("Bluetooth" compatible phone*) to the radio and display receiver assembly (the "Bluetooth" system is built in), and use the handsfree function of the cellular phone, even if it is in a pocket or bag. As a result, it is not necessary to use a connector attached directly to the cellular phone.
*: Some versions of "Bluetooth" compatible cellular phones may not function.

| *a | Radio and Display Receiver Assembly ("Bluetooth" Receiver Antenna Built-in) | *b | "Bluetooth" Compatible Cellular Phone |
| *c | "Bluetooth" Compatible Portable Audio Player | *d | Cellular Tower |
"Bluetooth" audio function
The "Bluetooth" built-in radio and display receiver assembly and a "Bluetooth" compatible portable audio player* can be connected using a "Bluetooth" wireless connection. This enables files stored in the portable audio player to be heard from the vehicle speakers. In addition, operations such as play/stop can be performed directly from radio and display receiver assembly.
*: Some versions of "Bluetooth" compatible audio players may not be able to operate the "Bluetooth" function, or music may play, but functions available using the radio and display receiver assembly may be limited.
Available "Bluetooth" audio devices
| "Bluetooth" specifications | Ver. 1.1 or higher (Recommended: Ver. 2.1) |
| Following profiles |
|
| Maximum number of audio devices that can be registered | 5 |
| USB AUDIO SYSTEM FUNCTION OUTLINE |
The No. 1 stereo jack adapter assembly is equipped with a USB terminal. Connecting a USB device or "iPod" to the No. 1 stereo jack adapter assembly allows music files to be played. Not only is it possible to play music from a USB device with audio functions, is also possible to play MP3 or WMA music files that are stored on a USB device. In addition, "iPod" control software is installed, allowing file selection from playlists and operation using shuffle mode.
USB audio system compatible model
USB Device
The following device formats can be used:
| Compatible USB device formats |
|
"iPod"
"iPod" is a trademark of Apple Inc., registered in the U.S. and other countries.
| Supported "iPod" Model | Supported Firmware Version or OS Version |
| "iPod" 5G | Ver. 1.3 |
| "iPod nano" 1G | Ver. 1.3.1 |
| "iPod nano" 2G | Ver. 1.1.3 |
| "iPod nano" 3G | Ver. 1.1.3 |
| "iPod nano" 4G | Ver. 1.0.4 |
| "iPod nano" 5G | Ver. 1.0.2 |
| "iPod nano" 6G | Ver. 1.0 |
| "iPod touch" 1G | iOS 2.1.0 |
| iOS 3.1.3 | |
| "iPod touch" 2G | iOS 3.1.3 |
| iOS 4.2.1 | |
| "iPod touch" Late 2009 (8GB) | iOS 3.1.3 |
| iOS 4.2.1 | |
| "iPod touch" 3G (32GB/64GB) | iOS 3.1.3 |
| iOS 4.2.1 | |
| "iPod touch" 4G | iOS 4.2.1 |
| "iPod classic" 1G | Ver. 1.1.2 |
| "iPod classic" 2G (120GB) | Ver. 2.0.1 |
| "iPod classic" 2009 (160GB) | Ver. 2.0.4 |
| "iPhone" 1G (iPhone) | iOS 2.2.1 |
| iOS 3.1.3 | |
| "iPhone" 2G (iPhone 3G) | iOS 3.1.3 |
| iOS 4.2.1 | |
| "iPhone" 3G (iPhone 3GS) | iOS 3.1.3 |
| iOS 4.2.1 | |
| "iPhone" iPhone 4 | iOS 4.2.1 |
| Unsupported Models | "iPod shuffle" 1G, 2G, 3G, 4G |
| "iPod photo" 1G, 2G | |
| "iPod" 1G, 2G, 3G, 4G | |
| "iPod mini" 1G, 2G | |
| "iPad |
| ASL (AUTOMATIC SOUND LEVELIZER) FUNCTION OUTLINE |
The ASL function automatically adjusts the sound volume in order to enable the listener to hear the sound of the audio system clearly even when vehicle noise increases (as vehicle speed increases, the volume is turned up, etc.).
Vehicle speed signals are received from the combination meter and used by the ASL.
| DIAGNOSIS DISPLAY DETAILED DESCRIPTION |
Service Menu Screen

Failure Diagnosis Screen

System Check Mode Screen

| *a | Example | - | - |
| Name | Component | Connection Method |
| DA | Radio and Display Receiver Assembly | Communication line for AVC-LAN |
| EXT BOX | Extension Module Assembly | Communication line for AVC-LAN |
| DAB | DAB (Digital Audio Broadcasting) Tuner | Communication line for AVC-LAN |
| Result | Meaning | Action |
| OK | Device does not respond with DTC | - |
| DETAIL | Device responds with check-type DTC | Look up DTC in "Unit Check Mode" |
| NCON | The system recognized the component when it was registered, but the component gives no response to "Diagnostic Mode ON Request". |
|
| NRES | The device gives no response to any one of "System Check Mode ON Request", "System Check Result Request", and "Diagnostic Memory Request". |
|
| Name | Component | Connection Method |
| AUX | No. 1 stereo jack adapter assembly | Vehicle wire harness |
Unit Check Mode Screen

| Display | Content |
| *1: Device name | Target device |
| *2: Past DTC | Diagnostic memory results and stored DTCs are output |
| *3: Present DTC | DTCs output in service check are output. |
| *4: DTC | DTC (Diagnostic Trouble Code) |
| *5: Diagnosis clear button | Pushing this button for 3 seconds clears diagnostic memory data of target device (responses to diagnostic system check result and displayed data are cleared) |
Function Check/Setting Screen

Microphone & Voice Recognition Check Screen

Vehicle Signal Check Mode Screen

| Display | Content |
| Battery | Battery voltage is displayed |
| IG | Ignition switch ON/OFF state is displayed |
| PKB | Parking brake ON/OFF state is displayed |
| REV | Reverse signal ON/OFF state is displayed |
| SPEED | Vehicle speed is displayed in km/h |
| TAIL | Taillight signal (light control switch) ON/OFF state is displayed |
| ADIM/TCAN | Display DIM/BRIGHT state is displayed |
Service Information Screen

Version Information Screen

Unit Version Information Screen

| *a | Example | - | - |