AUDIO AND VISUAL SYSTEM (for Radio Receiver Type) > USB Audio System Recognition/Play Error |
| 1.CHECK USB DEVICE OR "iPod" |
Disconnect the USB device or "iPod" from the stereo jack adapter assembly.
Check if playable files are present on the USB device or "iPod".
Check if the USB device format or "iPod" version is compatible.
| Result | Proceed to |
| No playable files exist, or device format or version is incompatible | A |
| Playable files exist, and device format or version is compatible | B |
|
| ||||
| A | ||
| ||
| 2.FORMAT USB DEVICE OR RESTORE "iPod" AND RECHECK |
Delete all files in the USB device or "iPod" and format/restore it.
Save the data again and check if it can be played on the in-vehicle device.
|
| ||||
| OK | ||
| ||
| 3.REPLACE USB DEVICE OR "iPod" |
Turn the ignition switch off.
Turn the ignition switch to ACC.
Connect a known good USB device or "iPod" to the stereo jack adapter.
| NEXT | |
| 4.CHECK USB DEVICE OR "iPod" |
Check if the USB device or "iPod" is recognized by the radio receiver, or if information, such as track, artist and album names, is displayed on the screen.
|
| ||||
| OK | ||
| ||