Home › BODY ELECTRICAL › LIGHTING › AUTOMATIC LIGHT CONTROL SENSOR

AUTOMATIC LIGHT CONTROL SENSOR > REMOVAL

for Preparation Click here



1. REMOVE COMBINATION METER ASSEMBLY
(Click here)


2. REMOVE LIGHT CONTROL SWITCH HOLE COVER


    E229143
  1. Disconnect the connector.

  1. Detach the 2 claws and guide underneath the upper instrument panel sub-assembly by hand, and remove the light control switch hole cover



3. REMOVE AUTOMATIC LIGHT CONTROL SENSOR


    E229142
  1. Detach the 2 claws and remove the automatic light control sensor.