Home › ENGINE · 1KD-FTV › FUEL › COMMON RAIL (w/ Glow Plug Controller)

COMMON RAIL (w/ Glow Plug Controller) > INSPECTION

for Preparation Click here



1. INSPECT COMMON RAIL ASSEMBLY
  1. Inspect the pressure discharge valve.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      0.96 to 1.16 Ω

      If the result is not as specified, replace the common rail assembly.