Home › SECURITIES › THEFT DETERRENT › BLOCKING SYSTEM

DTC    B15CC    Backup Battery Failure


DESCRIPTION

This DTC is stored when the telephone transceiver detects that the mayday battery is degraded.

DTC Code
DTC Detection Condition
Trouble Area
B15CC
Mayday battery disconnected (open circuit).
Mayday battery

INSPECTION PROCEDURE

NOTICE:
When replacing the mayday battery, refer to the Service Bulletin.

1.CHECK CONNECTION OF CONNECTOR
  1. Turn the ignition switch off.

  1. Check that the connectors are properly connected to the telephone transceiver and navigation antenna (GPS antenna).

    OK:
    Connectors are properly connected.



NG
CONNECT CONNECTOR CORRECTLY
OK


2.CLEAR DTC
  1. Clear the DTCs (Click here)


NEXT


3.CHECK FOR DTC
  1. Check for DTCs (Click here).

    OK:
    DTC B15CC or B15EC is not output.



NG
REPLACE MAYDAY BATTERY
OK

END