Home › ENGINE ยท 1KD-FTV › STARTING › GLOW PLUG CONTROLLER (w/ Glow Plug Controller)

GLOW PLUG CONTROLLER (w/ Glow Plug Controller) > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 GLOW PLUG CONTROLLER BRACKET
  1. Install the No. 2 glow plug controller bracket to the glow plug controller with the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }



2. INSTALL NO. 1 GLOW PLUG CONTROLLER BRACKET
  1. Install the No. 1 glow plug controller bracket to the glow plug controller with the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }



3. INSTALL GLOW PLUG CONTROLLER
  1. Install the glow plug controller with the nut and bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the 4 connectors and clamp.



4. INSTALL BATTERY AND BATTERY TRAY


5. INSTALL BATTERY BRACKET
  1. Install the battery bracket with the bolt and nut.

    Torque:
    6.0 N*m{ 61 kgf*cm , 53 in.*lbf }



6. CONNECT CABLE TO BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).