Home › ENGINE ยท 1KD-FTV › STARTING › GLOW PLUG CONTROLLER (w/ Glow Plug Controller)

GLOW PLUG CONTROLLER (w/ Glow Plug Controller) > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE BATTERY BRACKET
  1. Remove the bolt, nut and battery bracket.



4. REMOVE BATTERY AND BATTERY TRAY


5. REMOVE GLOW PLUG CONTROLLER


A280054
  1. Disconnect the 4 connectors.

  1. Remove the bolt, nut and glow plug controller from the vehicle.



6. REMOVE NO. 1 GLOW PLUG CONTROLLER BRACKET
  1. Remove the 2 screws and No. 1 glow plug controller bracket from the glow plug controller.



7. REMOVE NO. 2 GLOW PLUG CONTROLLER BRACKET
  1. Remove the 2 screws and No. 2 glow plug controller bracket from the glow plug controller.