Home › ENGINE ยท 1KD-FTV › FUEL › INJECTOR DRIVER (w/ Glow Plug Controller)

INJECTOR DRIVER (w/ Glow Plug Controller) > INSTALLATION

for Preparation Click here



1. INSTALL INJECTOR DRIVER BRACKET
  1. Install the injector driver bracket with the 4 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



2. INSTALL INJECTOR DRIVER ASSEMBLY
  1. Install the injector driver assembly with the 2 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the 4 connectors.



3. INSTALL GLOW PLUG CONTROLLER
(Click here)


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).