Home › BODY › INTERIOR › ROOF HEADLINING

ROOF HEADLINING > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 1 ROOF WIRE


  1. w/o EC Mirror:

    1. Position the positioning tape as shown in the illustration and install the No. 1 roof wire.



    2. Apply tape in the order shown in the illustration to fix the No. 1 roof wire in place.

      HINT:
      Adjust any slack of the No. 1 roof wire as indicated by the dashed lines in the illustration and apply tape.



      B277929E01


      Text in Illustration 
      *A
      w/o Rear Cooler
      *B
      w/ Rear Cooler
      *1
      Positioning Tape
      -
      -



  1. w/ EC Mirror:

    1. Apply double-sided tape at the location shown in the illustration.

    2. Position the positioning tape as shown in the illustration and install the No. 1 roof wire.



    3. Apply tape in the order shown in the illustration to fix the No. 1 roof wire in place.

      HINT:
      1. Do not apply the piece of tape labeled "tape A" to the branching wire for the EC mirror.
      2. Pull the No. 1 roof wire in the direction indicated by the arrow in the illustration, adjust the slack, and then fix the branching wire for the EC mirror in place with the piece of tape labeled "tape B".
      3. Adjust any slack of the No. 1 roof wire as indicated by the dashed lines in the illustration and apply tape.



      B294211E01


      Text in Illustration 
      *A
      w/o Rear Cooler
      *B
      w/ Rear Cooler
      *1
      Positioning Tape
      *2
      Tape A
      *3
      Tape B
      *4
      Double-sided Tape



2. INSTALL PACKING


B276958E01

HINT:
Use the same procedure for both packings.

  1. Align a new packing with the marking on the roof headlining and install the packing to the position shown in the illustration using double-sided tape.
    Text in Illustration 
    *1
    Packing
    *2
    Marking



3. INSTALL ROOF HEADLINING PACKING


B276957E01

HINT:
Use the same procedure for both roof headlining packings.

  1. Align a new roof headlining packing with the marking on the roof headlining and install the roof headlining packing to the position shown in the illustration using double-sided tape.
    Text in Illustration 
    *1
    Roof Headlining Packing
    *2
    Marking



4. INSTALL NO. 1 AIR OUTLET REGISTER ASSEMBLY (w/ Rear Cooler)


B205966E01
  1. Attach the 8 claws to install the bracket and No. 1 air outlet register.

  1. Install the 3 screws.
    Text in Illustration 
    *1
    Bracket
    *2
    No. 1 Air Outlet Register



5. INSTALL NO. 1 AIR OUTLET REGISTER ASSEMBLY (w/ Rear Cooler)


B205967E01

HINT:
Use the same procedure for both No. 1 air outlet registers.

  1. Attach the 4 claws to install the bracket and No. 1 air outlet register.

  1. Install the 2 screws.
    Text in Illustration 
    *1
    Bracket
    *2
    No. 1 Air Outlet Register