HOOD > ADJUSTMENT |
![]() |
| *1 | Centering Bolt |
| *2 | Standard Bolt |
| 1. ADJUST HOOD SUB-ASSEMBLY |
![]() |
Adjust the hood position.
Loosen the 4 hinge bolts on the hood and adjust the hood position.
Move the hood and adjust the clearance between the hood and front fender.
Tighten the 4 hinge bolts on the hood after the adjustment.
![]() |
Adjust the cushion rubbers so that the hood and fender are aligned.
![]() |
Adjust the hood lock.
Loosen the 3 bolts.
Adjust the hood lock position so that the striker can enter it smoothly.
Tighten the 3 bolts after the adjustment.