Home › BODY › ENGINE HOOD / DOOR › HOOD

HOOD > DISASSEMBLY

for Preparation Click here



1. REMOVE HOOD TO RADIATOR SUPPORT SEAL


    B277303
  1. Detach the 6 clips and remove the hood to radiator support seal.

    NOTICE:
    If the clips are damaged, replace them with new clips.



2. REMOVE HOOD INSULATOR (w/ Hood Insulator)


    B277306E01
  1. Remove the 15 clips and hood insulator.
    Text in Illustration 
    *A
    w/o Intercooler
    *B
    w/ Intercooler



3. REMOVE HOOD AIR INTAKE SEAL (w/ Intercooler)


    B277304
  1. Remove the 18 clips and hood air intake seal.



4. REMOVE HOOD BULGE (w/ Intercooler)


    B277305
  1. Remove the 10 nuts and hood bulge.



5. REMOVE NO. 1 HOOD BULGE PROTECTOR (w/ Intercooler)


    B278369
  1. Remove the No. 1 hood bulge protector from the hood bulge.



6. REMOVE WASHER NOZZLE SUB-ASSEMBLY

HINT:
Use the same procedure for both washer nozzles.



    E225210E02
  1. Using a screwdriver, detach the 2 claws as shown in the illustration.

    NOTICE:
    Be careful not to damage the windshield.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



    E225211
  1. Move the washer nozzle as shown in the illustration and remove it.



    E225212
  1. Disconnect the washer hose and remove the washer nozzle.



7. REMOVE WASHER HOSE ASSEMBLY


    B277307E01
  1. Detach the 4 clamps and disconnect the washer hose from the hanger.
    Text in Illustration 
    *1
    Clamp
    *2
    Hanger



8. REMOVE HOOD BUMPER CUSHION

HINT:
Use the same procedure for both hood bumper cushions.



    B283188
  1. Remove the hood bumper cushion.