Home › BODY › ENGINE HOOD / DOOR › BACK DOOR SUPPORT

BACK DOOR SUPPORT > DISPOSAL

for Preparation Click here



1. DISPOSE OF BACK DOOR STAY ASSEMBLY LH


    B278675E01
  1. Horizontally secure the back door stay in a vise with the piston-rod pulled out.

  1. Using a metal saw, gradually cut anywhere in the area labeled A to release the gas.

    Standard:
    Area
    Specified Condition
    A
    80 mm (3.15 in.)

    CAUTION:
    As metal debris may be blown outward by the gas, you must:
    1. Wear protective glasses.
    2. Cover the area being cut.

    NOTICE:
    The gas inside the back door stay is colorless, odorless and harmless. As there is a possibility that metal debris could scatter, cover the back door stay with a piece of cloth or other material.