RADIATOR GRILLE > REASSEMBLY |
| 1. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM |
Attach the 3 claws to install the radiator grille (or front panel) emblem.
| 2. INSTALL RADIATOR GRILLE MOULDING |
Install the radiator grille moulding with the 8 screws.
| 3. INSTALL NO. 1 RADIATOR GRILLE SEAL |
| Item | Temperature |
| Radiator Grille | 20 to 30°C (68 to 86°F) |
Clean the radiator grille surface.
Using a heat light, heat the radiator grille surface.
Remove the double-sided tape from the radiator grille surface.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 1 radiator grille seal.
Remove the peeling paper from the face of the No. 1 radiator grille seal.
Attach the 13 clips to install the No. 1 radiator grille seal.