Home › BODY › EXTERIOR › BACK DOOR OUTSIDE GARNISH

BACK DOOR OUTSIDE GARNISH > DISASSEMBLY

for Preparation Click here



1. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    E227745
  1. Detach the 2 claws.

  1. Remove the license plate light assembly while turning it as shown in the illustration.



2. REMOVE BACK DOOR OUTSIDE GARNISH PAD


    B277759
  1. Remove the back door outside garnish pad.



3. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR


    B277758
  1. Remove the back door outside garnish protector.



4. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR LH


    B277760
  1. Remove the back door outside garnish protector.



5. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR RH

HINT:
Use the same procedure described for the LH side.