Home › BODY › EXTERIOR › BACK DOOR OUTSIDE GARNISH

BACK DOOR OUTSIDE GARNISH > REASSEMBLY

for Preparation Click here



1. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR LH

HINT:
When installing the back door outside garnish protector, heat the back door outside garnish surface using a heat light.

Standard:
Item
Temperature
Back Door Outside Garnish
40 to 60°C (104 to 140°F)

NOTICE:
Do not heat the back door outside garnish excessively.

  1. Clean the back door outside garnish surface.

    1. Using a heat light, heat the back door outside garnish surface.

    2. Remove the double-sided tape from the back door outside garnish surface.

    3. Wipe off any tape adhesive residue with cleaner.



    B277760
  1. Install a new back door outside garnish protector in the position shown in the illustration.



2. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR RH

HINT:
Use the same procedure described for the LH side.



3. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR

HINT:
When installing the back door outside garnish protector, heat the back door outside garnish surface using a heat light.

Standard:
Item
Temperature
Back Door Outside Garnish
40 to 60°C (104 to 140°F)

NOTICE:
Do not heat the back door outside garnish excessively.

  1. Clean the back door outside garnish surface.

    1. Using a heat light, heat the back door outside garnish surface.

    2. Remove the double-sided tape from the back door outside garnish surface.

    3. Wipe off any tape adhesive residue with cleaner.



    B277758
  1. Install a new back door outside garnish protector in the position shown in the illustration.



4. INSTALL BACK DOOR OUTSIDE GARNISH PAD

HINT:
When installing the back door outside garnish pad, heat the back door outside garnish surface using a heat light.

Standard:
Item
Temperature
Back Door Outside Garnish
40 to 60°C (104 to 140°F)

NOTICE:
Do not heat the back door outside garnish excessively.

  1. Clean the back door outside garnish surface.

    1. Using a heat light, heat the back door outside garnish surface.

    2. Remove the double-sided tape from the back door outside garnish surface.

    3. Wipe off any tape adhesive residue with cleaner.



    B277759
  1. Install a new back door outside garnish pad in the position shown in the illustration.



5. INSTALL LICENSE PLATE LIGHT ASSEMBLY


    E227767
  1. Install the license plate light assembly while turning it as shown in the illustration.

  1. Attach the 2 claws to the license plate light assembly.