SIDE STEP > REASSEMBLY |
| 1. INSTALL NO. 1 SIDE STEP STAY SUB-ASSEMBLY LH |
Install a nose piece to an air riveter or hand riveter.
Insert the mandrel part of a new rivet into the nose piece.
![]() |
Using the riveter, install the No. 1 side step stay with the 2 rivets as shown in the illustration.
![]() |
| *1 | Riveter |
| *2 | Mandrel |
| *a | INCORRECT |
| *b | CORRECT |
![]() |
| *1 | Riveter |
| *a | INCORRECT |
| *b | CORRECT |
![]() |
| *1 | Riveter |
| *a | INCORRECT |
| *b | CORRECT |
| 2. INSTALL NO. 2 SIDE STEP BRACKET LH |
Install a nose piece to an air riveter or hand riveter.
Insert the mandrel part of a new rivet into the nose piece.
![]() |
Using the riveter, install the No. 2 side step bracket with the 2 rivets as shown in the illustration.
![]() |
| *1 | Riveter |
| *2 | Mandrel |
| *a | INCORRECT |
| *b | CORRECT |
![]() |
| *1 | Riveter |
| *a | INCORRECT |
| *b | CORRECT |
![]() |
| *1 | Riveter |
| *a | INCORRECT |
| *b | CORRECT |
| 3. INSTALL NO. 3 SIDE STEP BRACKET LH |
Install a nose piece to an air riveter or hand riveter.
Insert the mandrel part of a new rivet into the nose piece.
![]() |
Using the riveter, install the No. 3 side step bracket with the 2 rivets as shown in the illustration.
![]() |
| *1 | Riveter |
| *2 | Mandrel |
| *a | INCORRECT |
| *b | CORRECT |
![]() |
| *1 | Riveter |
| *a | INCORRECT |
| *b | CORRECT |
![]() |
| *1 | Riveter |
| *a | INCORRECT |
| *b | CORRECT |
| 4. INSTALL STEP PLATE COVER LH |
Attach the 17 claws to install the step plate cover.