Home › BODY › EXTERIOR › FRONT BUMPER

FRONT BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)
  1. Attach the 2 claws and clip to install fog light assembly LH.



2. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:
Use the same procedure described for the LH side.



3. INSTALL LOWER NO. 1 RADIATOR GRILLE
  1. Attach the 19 claws to install the lower No. 1 radiator grille.



4. INSTALL HEADLIGHT WASHER HOSE (w/ Headlight Cleaner System)
  1. Attach the 3 clamps to install the No. 1 headlight cleaner hose to the front bumper cover.



5. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)
  1. Attach the 2 claws to install the headlight washer actuator sub-assembly with the bolt.

    Torque:
    1.1 N*m{ 11 kgf*cm , 10 in.*lbf }



6. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT:
Use the same procedure described for the LH side.



7. INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    E225261
  1. Attach the 2 claws to install the headlight washer nozzle.



8. INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT:
Use the same procedure described for the LH side.