Home › BODY › EXTERIOR › REAR BUMPER

REAR BUMPER > INSTALLATION

for Preparation Click here


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL REAR BUMPER CENTER BRACKET

HINT:
Use the same procedure for both rear bumper center brackets.

  1. Install the rear bumper center bracket with the bolt.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }



2. INSTALL REAR BACK STEP FRAME
  1. Install the rear back step frame with the 6 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



3. INSTALL REAR BUMPER EXTENSION RH
  1. Install the rear bumper extension with the bolt.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



4. INSTALL REAR BUMPER SIDE RETAINER LH
  1. Attach the 4 claws to install the rear bumper side retainer.

  1. Install the 2 screws.



5. INSTALL REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure described for the LH side.



6. INSTALL REAR NO. 1 WHEEL OPENING EXTENSION LH
  1. Install 6 new clips to the rear No. 1 wheel opening extension.

  1. Attach the 6 clips to install the rear No. 1 wheel opening extension.

  1. Install the 2 screws.



7. INSTALL REAR NO. 1 WHEEL OPENING EXTENSION RH

HINT:
Use the same procedure described for the LH side.



8. INSTALL REAR BODY MUDGUARD SUPPORT LH
  1. Install the rear body mudguard support with 2 new grommets.



9. INSTALL REAR BODY MUDGUARD SUPPORT RH

HINT:
Use the same procedure described for the LH side.



10. INSTALL REAR BUMPER COVER
  1. w/ TOYOTA Parking Assist-sensor System:
    Connect the 2 No. 3 luggage room wire connectors.

  1. Attach the 8 claws to install the rear bumper cover.

  1. Install the 6 screws and 2 clips.

  1. Install the 3 clips.



11. INSTALL REAR QUARTER PANEL MUDGUARD LH (w/ Rear Quarter Panel Mudguard)
  1. Install the rear quarter panel mudguard with the 6 screws.



12. INSTALL REAR QUARTER PANEL MUDGUARD RH (w/ Rear Quarter Panel Mudguard)

HINT:
Use the same procedure described for the LH side.