Home › BODY › EXTERIOR › SIDE MOULDING (for Front Side)

SIDE MOULDING (for Front Side) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. INSTALL FRONT WHEEL OPENING EXTENSION LH
  1. Install 8 new clips to the front wheel opening extension.

  1. Attach the 8 clips to install the front wheel opening extension.

  1. w/ Front Fender Mudguard:
    Install the 4 screws.

  1. w/o Front Fender Mudguard:
    Install the 7 screws.



2. INSTALL FRONT FENDER MUDGUARD LH (w/ Front Fender Mudguard)
  1. Install the front fender mudguard with the 4 screws.



3. INSTALL FRONT BUMPER COVER
  1. w/ Headlight Cleaner System:
    Connect the headlight cleaner hose.

  1. w/ Fog Light:
    Connect the 2 fog light connectors.

  1. Attach the 8 claws to install the front bumper cover.

  1. Install the 5 clips, 2 bolts and 2 screws.

  1. Install the 3 clips and 6 screws.



4. INSTALL FOG LIGHT COVER LH (w/ Fog Light)
  1. Attach the 8 claws to install the fog light cover.



5. INSTALL FOG LIGHT COVER RH (w/ Fog Light)

HINT:
Use the same procedure described for the LH side.



6. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)
  1. Attach the 8 claws to install the front bumper hole cover.



7. INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT:
Use the same procedure described for the LH side.



8. INSTALL RADIATOR GRILLE
  1. Attach the 6 claws to install the radiator grille.

  1. Install the 2 screws and 2 clips.