Home › BODY › EXTERIOR › SIDE MOULDING (for Front Side)

SIDE MOULDING (for Front Side) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE RADIATOR GRILLE


    B277882
  1. Remove the 2 clips and 2 screws.



    B277883E01
  1. Put protective tape around the radiator grille.
    Text in Illustration 
    *1
    Protective Tape

  1. Detach the 6 claws and remove the radiator grille.



2. REMOVE FOG LIGHT COVER LH (w/ Fog Light)


    B283429E01
  1. Put protective tape around the fog light cover.

  1. Using the screwdriver, detach the 8 claws and remove the fog light cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



3. REMOVE FOG LIGHT COVER RH (w/ Fog Light)

HINT:
Use the same procedure described for the LH side.



4. REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)


    B283515E01
  1. Put protective tape around the front bumper hole cover.

  1. Using the screwdriver, detach the 8 claws and remove the front bumper hole cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



5. REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT:
Use the same procedure described for the LH side.



6. REMOVE FRONT BUMPER COVER


    B277936
  1. Remove the 6 screws and 3 clips.



    B277938E01
  1. Put protective tape around the front bumper cover.

  1. Remove the 2 screws, 2 bolts and 5 clips.
    Text in Illustration 
    *1
    Protective Tape



    B277939
  1. Detach the 8 claws and remove the front bumper cover.

  1. w/ Headlight Cleaner System:
    Disconnect the headlight cleaner hose, and then drain the washer fluid.

    HINT:
    Use a container to collect the washer fluid.

  1. w/ Fog Light:
    Disconnect the 2 fog light connectors.



7. REMOVE FRONT FENDER MUDGUARD LH (w/ Front Fender Mudguard)


    B277878
  1. Remove the 4 screws and front fender mudguard.



8. REMOVE FRONT WHEEL OPENING EXTENSION LH


  1. w/ Front Fender Mudguard:



      B279914E01
    1. Put protective tape around the front wheel opening extension.
      Text in Illustration 
      *1
      Protective Tape

    2. Remove the 4 screws.



    B279917E01
  1. w/o Front Fender Mudguard:

    1. Put protective tape around the front wheel opening extension.
      Text in Illustration 
      *1
      Protective Tape

    2. Remove the 7 screws.



    B277901
  1. Detach the 8 clips and remove the front wheel opening extension.

  1. Remove the 8 clips from the vehicle body.