Home › BODY › EXTERIOR › SIDE MOULDING (for Rear Side)

SIDE MOULDING (for Rear Side) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Rear Quarter Panel Mudguard)
  1. Install the rear quarter panel mudguard with the 6 screws.



2. REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Rear Quarter Panel Mudguard)

HINT:
Use the same procedure described for the LH side.



3. REMOVE REAR BUMPER COVER


    B277918
  1. Remove the 3 clips.



    B277919
  1. Remove the 2 clips and 6 screws.



    B277920E01
  1. Put protective tape around the rear bumper cover.
    Text in Illustration 
    *1
    Protective Tape

  1. w/ TOYOTA Parking Assist-sensor System:
    Disconnect the 2 No. 3 luggage room wire connectors.

  1. Detach the 8 claws and remove the rear bumper cover.



4. REMOVE REAR NO. 1 WHEEL OPENING EXTENSION LH


    B277905E01
  1. Put protective tape around the rear No. 1 wheel opening extension.
    Text in Illustration 
    *1
    Protective Tape

  1. Remove the 2 screws.

  1. Detach the 6 clips and remove the rear No. 1 wheel opening extension.

  1. Remove the 6 clips from the vehicle body.



5. REMOVE SIDE STEP ASSEMBLY LH (w/ Side Step)


    B277855
  1. Remove the 5 bolts, nut and side step.



6. REMOVE REAR NO. 2 WHEEL OPENING EXTENSION LH


    B277904E01
  1. Put protective tape around the rear No. 2 wheel opening extension.
    Text in Illustration 
    *1
    Protective Tape

  1. Remove the retainer.

  1. Detach the 2 clips and remove the rear No. 2 wheel opening extension.

  1. Remove the 2 clips from the vehicle body.