Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

DTC    B158B    Touch Switch Malfunction


DESCRIPTION

This DTC is stored when a malfunction occurs in a panel switch.

DTC Code
DTC Detection Condition
Trouble Area
B158B
Touch switch malfunction
Navigation receiver assembly

INSPECTION PROCEDURE

1.CHECK MULTI-DISPLAY
  1. Check if there is any foreign matter caught between the display and exterior frame of the multi-display.

    OK:
    No foreign matter is caught between the display and exterior frame of the multi-display.

    HINT:
    If there is foreign matter between the display and exterior frame of the multi-display, the touch panel will remain pressed, preventing touch switch operation.



NG
REMOVE FOREIGN MATTER
OK


2.CHECK TOUCH PANEL
  1. Check for foreign matter on the display.

    OK:
    The display is clean.



NG
CLEAN DISPLAY AND RECHECK TOUCH PANEL
OK


3.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


4.CHECK FOR DTC
  1. Check for the DTCs and check if the same trouble occurs again.

    OK:
    No DTCs are output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)