Home › ENGINE ยท 1KD-FTV › ENGINE CONTROL SYSTEM › MASS AIR FLOW METER (w/o Glow Plug Controller)

MASS AIR FLOW METER (w/o Glow Plug Controller) > INSPECTION

for Preparation Click here



1. INSPECT MASS AIR FLOW METER SUB-ASSEMBLY


    A251997E01
  1. Perform a visual check for any foreign matter on the platinum hot wire (heater) of the mass air flow meter shown in the illustration.

    OK:
    There is no foreign matter.

    Text in Illustration 
    *1
    Platinum Hot Wire (Heater)
    If the result is not as specified, replace the mass air flow meter.