Home › ENGINE · 2TR-FBE › ENGINE CONTROL SYSTEM › A/F SENSOR HEATER RELAY

A/F SENSOR HEATER RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT AIR FUEL RATIO SENSOR HEATER RELAY (A/F)


    A184106E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    Battery voltage is not applied to terminals 1 and 2
    10 kΩ or higher
    Battery voltage is applied to terminals 1 and 2
    Below 1 Ω

    If the result is not as specified, replace the air fuel ratio sensor heater relay.