Home › DRIVE LINE › DIFFERENTIAL › DIFFERENTIAL CARRIER ASSEMBLY (for DANA Made)

DIFFERENTIAL CARRIER ASSEMBLY (for DANA Made) > DISASSEMBLY > Preparation



SST 
I000023
09308-00010
Oil Seal Puller


I000024
09308-10010
Oil Seal Puller


I000032
09330-00021
Companion Flange Holding Tool


I000883
(09330-00030)
Pin


I000054
09556-22010
Drive Pinion Front Bearing
Remover

I010020
09930-00010
Drive Shaft Nut Chisel


I010021
(09931-00010)
Handle


I010022
(09931-00020)
Nut Chisel


I000119
09950-00020
Bearing Remover


I002108
09950-30012
Puller A Set


I002109
(09951-03010)
Upper Plate


I002110
(09953-03010)
Center Bolt


I002111
(09954-03010)
Arm


I002142
(09955-03030)
Lower Plate 130


I002146
(09956-03040)
Adapter 22


I002205
09950-40011
Puller B Set


I002207
(09951-04020)
Hanger 200


I002208
(09952-04010)
Slide Arm


I002211
(09953-04030)
Center Bolt 200


I002212
(09954-04010)
Arm 25


I002220
(09955-04061)
Claw No. 6


I002222
(09957-04010)
Attachment


I002223
(09958-04011)
Holder


I002306
09950-60010
Replacer Set


I002326
(09951-00360)
Replacer 36


I002328
(09951-00380)
Replacer 38


I002307
09950-70010
Handle Set


I002357
(09951-07150)
Handle 150




EQUIPMENT
Brass bar
-
Chisel
-
Dial indicator with magnetic base
-
Feeler gauge
-
Hammer
-
Micrometer
-
MP grease
-
Needle nose pliers
-
Plastic hammer
-
Press
-
Red lead
-
Screwdriver
-
Tape
-
Torque wrench
-
Vernier calipers
-


LUBRICANT (2012/01 - 2012/10) / Recommended Viscosity
Item
Temperature
Viscosity
Front Differential
Rear Differential
Above -18°C (0°F)
SAE 90
Below -18°C (0°F)
SAE 80W-90 or SAE 80W

LUBRICANT (2012/01 - 2012/10) / Differential Oil Type
Item
Oil type
Front Differential
Rear Differential
Hypoid gear oil API GL-5

LUBRICANT (2012/01 - 2012/10) / Standard Differential Oil Capacity
Item
Specified Condition
Front Differential
1.40 to 1.50 liters (1.48 to 1.58 US qts., 1.23 to 1.32 Imp. qts.)
Rear Differential
3.30 to 3.40 liters (3.49 to 3.59 US qts., 2.91 to 2.99 Imp. qts.)
w/ Differential Lock
2.85 to 2.95 liters (3.01 to 3.12 US qts., 2.51 to 2.59 Imp. qts.)
4WD, Pre-Runner and made DANA
2.40 to 2.50 liters (2.54 to 2.64 US qts., 2.11 to 2.20 Imp. qts.)


LUBRICANT (2012/10 -        ) / Recommended Viscosity
Item
Temperature
Viscosity
Front Differential
Rear Differential
Above -18°C (0°F)
SAE 90
Below -18°C (0°F)
SAE 80W-90 or SAE 80W

LUBRICANT (2012/10 -        ) / Differential Oil Type
Item
Oil type
Front Differential
Rear Differential
Hypoid gear oil API GL-5

LUBRICANT (2012/10 -        ) / Standard Differential Oil Capacity
Item
Specified Condition
Front Differential
1.40 to 1.50 liters (1.48 to 1.58 US qts., 1.23 to 1.32 Imp. qts.)
Rear Differential
3.30 to 3.40 liters (3.49 to 3.59 US qts., 2.91 to 2.99 Imp. qts.)
4WD, Pre-Runner and made DANA
2.40 to 2.50 liters (2.54 to 2.64 US qts., 2.11 to 2.20 Imp. qts.)


RECOMMENDED TOOLS
I002297
09011-2C590
Socket Wrench
30mm/12p
-
I001236
09013-1C550
"TORX" Socket Wrench E-type
E14
-
I001889
09013-7C100
Straight Hexagon
10mm
-
I102211
09017-1C100
Union Nut Wrench
10mm
-
I000406
09051-1C400
Pin Punch
3
-
I000114
09905-00012
Snap Ring No. 1 Expander
-
I000115
09905-00013
Snap Ring Pliers
-


SSM
Toyota Genuine seal packing 1281, Three Bond 1281 or equivalent
-
Toyota Genuine Adhesive 1360K, Three Bond 1360K or equivalent
-
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
-