Home › Vehicle Exterior › BODY WELD POINT › NAME PLATE › 2015.11–2016.07
BM33K0E _01 Vehicle Exterior _046210 BODY WELD POINT _0217949 NAME PLATE F

BODY WELD POINT  NAME PLATE  ATTACHMENT POSITION  


1.

Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.

HINT:

Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.


2.

Wipe off the remaining double-sided tape using a clean cloth or equivalent.

NOTICE:

If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.


3.

After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.

HINT:

The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.



B410857C02
3.198,0.927 3.198,0.458 3.198,0.458 3.583,0.458 true 3.229,1.396 3.229,1.802 3.229,1.802 3.656,1.802 true 4.375,4.688 5.052,4.688 false 3.594,5.792 3.594,5.448 3.594,5.448 4.01,5.448 false 3.625,0.375 3.906,0.615 0.281,0.24 10 true (2) 3.708,1.719 3.99,1.958 0.281,0.24 10 true (1) 5.115,4.615 5.719,4.906 0.604,0.292 10 false (2) ● *2 4.073,5.375 4.677,5.667 0.604,0.292 10 false (1) ● *1
*1 BACK DOOR NAME PLATE *2 NO. 1 BACK DOOR EMBLEM
● Non-reusable part - -


B433660C01
1.125,5.51 5.781,7.635 4.656,2.125 4.417,3.917 4.917,3.917 false 5.479,4.917 5.979,4.917 false 4.24,6.01 4.74,6.01 false 4.208,6.99 4.708,6.99 false 3.146,8.167 3.646,8.167 false 1.573,1.698 1.573,1.365 1.573,1.365 1.24,1.365 true 3.75,1.125 3.75,0.542 3.75,0.542 4.417,0.542 true 1.667,3.219 1.667,2.969 1.667,2.969 1.667,1.885 true 3.979,1.083 4.563,1.083 true 1.031,1.292 1.229,1.552 0.198,0.26 10 true (1) 1.594,3.25 1.792,3.51 0.198,0.26 10 false (2) 4.469,0.448 4.667,0.708 0.198,0.26 10 false (3) 4.615,1 4.813,1.26 0.198,0.26 10 false (4) 4.969,3.823 5.656,4.083 0.688,0.26 10 false (1) ● *3 6.031,4.823 6.719,5.083 0.688,0.26 10 false (2) ● *4 4.833,5.813 5.521,6.073 0.688,0.26 10 false (3) ● *1 4.781,6.833 5.469,7.094 0.688,0.26 10 false (3) ● *1 3.729,8.073 4.417,8.333 0.688,0.26 10 false (4) ● *2
*1 BACK DOOR MARK *2 FRONT NO. 2 DOOR NAME PLATE
*3 NO. 1 BACK DOOR NAME PLATE *4 NO. 2 BACK DOOR NAME PLATE
● Non-reusable part - -


NO. 1 BACK DOOR EMBLEM


B410861C01
0.448,3.573 0.708,3.573 false 2.625,3.802 2.885,3.802 false 0.292,3.479 0.573,3.729 0.281,0.25 10 false *a 2.917,3.719 3.198,3.969 0.281,0.25 10 false *a
*a Boss



BACK DOOR NAME PLATE


B421611C01
0.073,0.052 0.323,0.302 0.25,0.25 10 true *a 0.677,1.438 0.813,1.635 0.135,0.198 10 true A 1.167,0.885 1.302,1.083 0.135,0.198 10 true B 1.635,0.885 1.771,1.083 0.135,0.198 10 true C 1.833,0.885 1.969,1.083 0.135,0.198 10 true D 2.115,0.885 2.25,1.083 0.135,0.198 10 true E 2.552,0.885 2.688,1.083 0.135,0.198 10 true G 2.667,0.656 2.813,0.823 0.146,0.167 10 true F 2.854,0.917 2.969,1.083 0.115,0.167 10 true H 3.458,1.438 3.583,1.625 0.125,0.188 10 true J 3.646,1.438 3.771,1.625 0.125,0.188 10 true K 3.573,0.646 3.688,0.813 0.115,0.167 10 true I 4.25,0.667 4.375,0.813 0.125,0.146 10 true L 5.115,0.667 5.25,0.823 0.135,0.156 10 true O 5.667,0.656 5.802,0.813 0.135,0.156 10 true R 6.396,1.438 6.521,1.615 0.125,0.177 10 true U 5.792,1.427 5.917,1.625 0.125,0.198 10 true T 5.573,1.438 5.698,1.635 0.125,0.198 10 true S 5.083,1.427 5.208,1.625 0.125,0.198 10 true Q 4.854,1.427 4.979,1.625 0.125,0.198 10 true P 4.135,1.438 4.26,1.635 0.125,0.198 10 true M 4.354,1.458 4.479,1.656 0.125,0.198 10 true N 2.073,1.823 2.208,2.021 0.135,0.198 10 true W 1.375,1.844 1.51,2.042 0.135,0.198 10 true V 0.844,0.51 0.979,0.688 0.135,0.177 10 true X 6.208,0.521 6.344,0.698 0.135,0.177 10 true Y
*a Reference Values - -


Standard:
Area Specified Condition Area Specified Condition
A 19.0 mm (0.748 in.) B 19.2 mm (0.756 in.)
C 19.3 mm (0.760 in.) D 19.4 mm (0.764 in.)
E 19.4 mm (0.764 in.) F 81.3 to 83.3 mm (3.20 to 3.28 in.)
G 19.5 mm (0.768 in.) H 19.5 mm (0.768 in.)
I 42.8 to 44.8 mm (1.69 to 1.76 in.) J 19.5 mm (0.768 in.)
K 19.5 mm (0.768 in.) L 43.0 to 45.0 mm (1.69 to 1.77 in.)
M 19.5 mm (0.768 in.) N 19.5 mm (0.768 in.)
O 83.1 to 85.1 mm (3.27 to 3.35 in.) P 19.4 mm (0.764 in.)
Q 19.3 mm (0.760 in.) R 41.3 to 43.3 mm (1.63 to 1.70 in.)
S 19.2 mm (0.756 in.) T 19.2 mm (0.756 in.)
U 19.0 mm (0.748 in.) V 38.5 to 40.5 mm (1.52 to 1.59 in.)
W 41.2 to 43.2 mm (1.62 to 1.70 in.) X 11.3 mm (0.445 in.)
Y 14.4 mm (0.567 in.) - -



BACK DOOR MARK


B433658C01
1.667,0.823 1.667,0.573 1.667,0.573 2,0.573 true 5.333,0.813 5.333,0.563 5.333,0.563 5.667,0.563 true 1.5,2.708 1.5,2.458 1.5,2.458 1.833,2.458 true 0.104,0.083 0.417,0.281 0.313,0.198 10 false *a 2.021,0.51 2.333,0.708 0.313,0.198 10 true *b 5.688,0.49 6,0.688 0.313,0.198 10 true *b 1.854,2.365 2.167,2.563 0.313,0.198 10 true *b 1.198,0.865 1.354,1.063 0.156,0.198 10 true A 4.76,0.865 4.917,1.063 0.156,0.198 10 true A 2.479,0.875 2.635,1.073 0.156,0.198 10 true A 6.021,0.865 6.177,1.063 0.156,0.198 10 true A 0.667,2.771 0.823,2.969 0.156,0.198 10 true A 1.917,2.771 2.083,2.969 0.167,0.198 10 true A 1.979,1.427 2.135,1.625 0.156,0.198 10 true B 5.552,1.438 5.708,1.635 0.156,0.198 10 true B 1.583,3.385 1.74,3.583 0.156,0.198 10 true C
*a Reference Values *b Back Door R End


Standard:
Area Specified Condition Area Specified Condition
A 56.0 mm (2.20 in.) B 175.0 mm (6.89 in.)
C 263.0 mm (10.4 in.) - -



FRONT NO. 2 DOOR NAME PLATE


B433659C01
2.167,0.917 2.167,0.667 2.167,0.667 2.417,0.667 false 1.51,0.958 1.667,1.156 0.156,0.198 10 true A 2.583,0.948 2.74,1.146 0.156,0.198 10 true A 0.156,0.115 0.354,0.313 0.198,0.198 10 true *a 2.406,0.583 2.625,0.76 0.219,0.177 10 true *b 2.208,1.615 2.365,1.813 0.156,0.198 10 true B
*a Reference Values
*b Back Door R End


Standard:
Area Specified Condition
A 56.0 mm (2.20 in.)
B 116.0 mm (4.57 in.)



NO. 1 BACK DOOR NAME PLATE


B433656C01
1.667,0.813 1.667,0.479 1.667,0.479 2.083,0.479 true 0.844,0.917 1,1.115 0.156,0.198 10 true A 2.417,0.917 2.573,1.115 0.156,0.198 10 true A 1.042,1.677 1.198,1.875 0.156,0.198 10 true B 0.125,0.083 0.417,0.281 0.292,0.198 10 true *a 2.094,0.417 2.406,0.573 0.313,0.156 10 true *b
*a Reference Values
*b Back Door R End


Standard:
Area Specified Condition
A 54.0 mm (2.13 in.)
B 37.0 mm (1.46 in.)



NO. 2 BACK DOOR NAME PLATE


B433657C01
1.917,0.802 1.917,0.469 1.917,0.469 2.417,0.469 false 0.063,0.083 0.302,0.313 0.24,0.229 10 true *a 2.417,0.385 2.719,0.583 0.302,0.198 10 true *b 1.083,1.073 1.24,1.271 0.156,0.198 10 true A 3,1.052 3.156,1.25 0.156,0.198 10 true A 1.167,1.906 1.323,2.104 0.156,0.198 10 true B
*a Reference Values
*b Back Door R End


Standard:
Area Specified Condition
A 97.0 mm (3.82 in.)
B 59.0 mm (2.32 in.)