Upper Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Body Mounting Hole | φ26 (1.02) |
| B, b | Shock Absorber Installation Hole | φ12.2 (0.48) |
| C, c | Body Mounting Hole | φ31 (1.22) |
| D, d | Side Rail Inner Channel Standard Hole | 16X16
(0.63X0.63) |
| E, e | Body Mounting Hole | φ31 (1.22) |
| F, f | Body Mounting Hole | φ65 (2.56) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | mm
(in.) |
- | - |
Lower Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Bumper Reinforcement Installation Nut | M10 (0.39) |
| B, b | Stabilizer Bracket Installation Nut | M10 (0.39) |
| C, c | Suspension Lower Arm Installation Hole | 16.5X34.5
(0.65X1.36) |
| D, d | Suspension Lower Arm Installation Hole | 16.5X34.5
(0.65X1.36) |
| E, e | Side Rail Inner Channel Standard Hole | 16X16
(0.63X0.63) |
| F, f | Suspension Lower Arm Installation Hole | φ14.3 (0.56) |
| G, g | Suspension Upper Arm Installation Hole | φ14.3 (0.56) |
| H, h | Bound Stopper Installation Nut | M8 (0.31) |
| J | Lateral Control Rod Installation Hole | φ12.2 (0.48) |
| K, k | Transport Hook Installation Nut | M12 (0.47) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | Distance between points other than those to the left | *b | mm
(in.) |