Home › Vehicle Exterior › BODY WELD POINT › FRONT DOOR OUTER PANEL
BM33K0E _01 Vehicle Exterior _046210 BODY WELD POINT _0223720 FRONT DOOR OUTER PANEL F

BODY WELD POINT  FRONT DOOR OUTER PANEL  CUT AND JOIN REPLACEMENT SECTIONS  


K125164

REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108827

Cut and Join Location

a.

After grinding off the hemming location, remove the outer panel.

K123794C01
6.5,3 6.333,3 6.333,3 6.073,2.417 false 6.542,2.906 6.854,3.063 0.313,0.156 10 false *a 5.771,0.75 6.083,0.906 0.313,0.156 10 false *b
*a Disc Sander *b Hemming Location




INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108831

Butt Weld
K108833

Spot MIG Weld
K108834

Body Sealer

a.

Before temporarily installing the new parts, apply body sealer to the reinforcement, side impact protection beam and backside of the new parts.

NOTICE:

Do not close the drain hole.


HINT:

Apply sealer evenly about 10 mm (0.39 in.) from the flange and 3 mm (0.12 in.) in diameter on the outer panel and apply just enough sealer for the reinforcement to make contact.


K123795C01
2.667,3.667 2.5,3.667 2.5,3.667 2.438,3.344 false 2.698,3.573 3.01,3.729 0.313,0.156 10 false *1 6.104,3.01 6.417,3.167 0.313,0.156 10 false *a 5.281,1.375 5.594,1.531 0.313,0.156 10 false *b
*1 FRONT DOOR PANEL OUTER - -
*a Drain Hole *b 10 mm (0.39 in.)



b.

Bend the flange hem with a wooden hammer and dolly.

HINT:

Bend the panel gradually so as not to distort it.


K123796C01
5.333,6.667 5.167,6.667 5.167,6.667 5.396,6.135 false 6.083,5.719 6.333,6.167 6.333,6.167 6.5,6.167 false 5.875,5.271 6,4.833 6,4.833 6.167,4.833 false 6.188,4.74 6.5,4.896 0.313,0.156 10 false *a 6.531,6.083 6.844,6.24 0.313,0.156 10 false *b 5.375,6.573 5.688,6.729 0.313,0.156 10 false *c
*a Cloth Tape *b Dolly
*c Wooden Hammer - -



c.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.