Home › Vehicle Exterior › BODY WELD POINT › BACK DOOR OPENING TROUGH
BM33K0E _01 Vehicle Exterior _046210 BODY WELD POINT _0223725 BACK DOOR OPENING TROUGH F

BODY WELD POINT  BACK DOOR OPENING TROUGH  CUT AND JOIN REPLACEMENT SECTIONS  


K125171

With the quarter panel cut and join replacement sections removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108826

Cut with Disc Sander etc.
K108827

Cut and Join Location

K125238C01
3.01,0.885 3.323,1.042 0.313,0.156 10 false *a
*a 40 mm (1.57 in.) - -



INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108830

Fillet Weld
K108831

Butt Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K125239C01
2.5,2.833 2.667,2.833 2.667,2.833 3.385,1.865 false 2.344,2.75 2.656,2.906 0.313,0.156 10 false *1 4.906,2.938 5.219,3.094 0.313,0.156 10 false *a 4.635,3.229 4.948,3.385 0.313,0.156 10 false *b 4.302,3.469 4.615,3.625 0.313,0.156 10 false *c
*1 BACK DOOR OPENING SIDE FRAME SUB-ASSEMBLY - -
*a 25 mm (0.98 in.) *b 20 mm (0.79 in.)
*c 15 mm (0.59 in.) - -



c.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.