Home › Vehicle Exterior › BODY WELD POINT › BODY LOWER BACK PANEL
BM33K0E _01 Vehicle Exterior _046210 BODY WELD POINT _0223728 BODY LOWER BACK PANEL F

BODY WELD POINT  BODY LOWER BACK PANEL  CUT AND JOIN REPLACEMENT SECTIONS (LARGE AREAS)  


K125175

With the back door opening side frame cut and join replacement sections removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

K125258

K125259C01
4.667,2.917 4.979,3.073 0.313,0.156 10 false *a
*a 220 mm (8.66 in.) - -


K125260

K125261


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108831

Butt Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K125262C01
4.5,3.333 4.25,3.333 4.25,3.333 3.99,2.875 false 4.563,3.25 4.875,3.406 0.313,0.156 10 false *1
*1 BODY LOWER BACK PANEL SUB-ASSEMBLY - -


K125263

K125264

K125265


c.

After welding, apply the foamed sealing material to the corresponding parts. (See the painting/coating)


d.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


e.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.